Remove A Honeywell Thermostat; Remove All Z-Wave Devices; Abort A Z-Wave Action - Honeywell Tuxedo Touch Series Installation And Setup Manual

Remove a Honeywell Thermostat

To remove a Honeywell Thermostat from the Z-Wave network, do the following:
ICON
1. At the Tuxedo Touch Keypad:
a) Press the Automation icon from the "Home"
screen and then press the
Z-Wave Setup icon to display the
"Z-Wave Device Management" screen.
b) Highlight the thermostat and press the Z-
Wave Remove/Delete icon.
2. At the thermostat:
a) Follow the instructions in the thermostat
Installation Guide under "Installer setup" to
"Remove a Z-Wave Network Connection".
b) Once the exclusion process is complete,
press Done and the thermostat is removed.

Remove All Z-Wave Devices

ICON
1. At the Tuxedo Touch Keypad:
a) Press the Automation icon from the
"Home" screen and then press the Z-Wave
Setup icon to display the "Z-Wave Device
Management" screen.
b) Press the Z-Wave Reset icon to delete all
devices from the controller.
c) Press the Continue or Cancel button.

Abort a Z-Wave Action

ICON
1. At the Tuxedo Touch Keypad:
a) Press the Automation icon from the
"Home" screen and then press the Z-
Wave Setup icon to display the "Z-Wave
Device Management" screen.
b) Press the Z-Wave Abort Operation icon to
abort that process.
Automation (cont'd)
ACTION
ACTION
ACTION
30
NOTES
Note: Honeywell is not responsible for
property damages due to improper setting of
the thermostat modes.
Z-Wave Remove/Delete -clears the node
from the keypad and resets device to the
default setting.
Notes:
• If the device is not removed, refer to the "Z-
Wave Troubleshooting" section.
• To remove a defective device, refer to the
"Z-Wave Troubleshooting" section.
NOTES
The message is displayed:
WARNING!! This Z-WAVE controller is
about to be factory defaulted and will loose
all devices in the enrolled list. All Z-WAVE
devices must be re-enrolled.
NOTES
If inadvertently a wrong process is selected, (i.e.,
add, delete, or remove failed device) press the Z-
Wave Abort icon to abort that process.