Advanced Setup; System Information; Keypad Reset; Keypad Test - Honeywell Tuxedo Touch Series Installation And Setup Manual

Advanced Setup

The Advanced Setup screen allows access to Software Version, Keypad Reset, Keypad Test, Night
Setup and Output Setup menus.

System Information

To view the latest software version installed on your system, do the following:
ICON
1. From the "Home" screen, press Setup
and the System Setup icon.
2. Press the Advanced Setup icon.
3. Enter your Authorized Code.

Keypad Reset

To access Keypad Reset do the following:
ICON
1. From the "Home" screen, press Setup
and the System Setup icon.
2. Press the Advanced Setup icon.
3. Enter your Authorized Code.
4. Press the Keypad Reset icon.

Keypad Test

A series of diagnostic tests are provided that allows verification of correct operation of the keypad and
its connections to the security system. There are a total of five diagnostic tests; LCD Display Test,
Audio Test, LED Test, Calibration Test and Z-Wave Test.
Performing Diagnostic Tests
Select any diagnostic test from the Diagnostics screen by pressing its associated Test icon. All or any
individual test may be run when you access the Diagnostics screen; however, each test must be
performed one at a time.
At any time when a test is not being performed, you can press back to return to the previous screen, or
home to return to your home page.
Once the Diagnostics screen is exited, subsequent entry to this screen displays all test options as
"Not Performed."
LCD Display Test
Perform the LCD Display Test as follows:
ICON
1. Press the Advanced Setup icon.
2. If applicable, enter your Authorized Code.
3. Press the Keypad Test icon.
4. Press the LCD Display Test icon; a series of
screens appear.
After each type of display, you are asked if the
display was proper.
User System Setup (cont'd)
ACTION
ACTION
ACTION
23
NOTES
The "Software Version" is displayed in the lower right
corner of the screen.
NOTES
The screen displays: Processor Reset
Are you sure you want to reset?
OK or Cancel
If the keypad requires resetting, press OK and the
keypad resets. If Cancel is selected, keypad is not
reset.
NOTES
Note: The Emergency screen cannot be
accessed while running the LCD Display Test.
If the response to all questions is yes, the LCD
Display Test message area of the Diagnostics
screen displays "Passed".