Option Installation; Clerk Key Unit (Clk-K17,Clk-K18) - Casio QT-2000 Service Manual

6. OPTION INSTALLATION

6-1. Clerk key unit (CLK-K17,CLK-K18)

1. Cut off the cable cover from the bottom case.
2. Release the screw which is fixing the keyboard and take tke keyboard out.
Cut the cable cover.
3. Insart the cable of clerk key unit and connect to CN5 of Main PCB.
4. Tighten the screw to mount the clerk key unit.
CN5
Wire clamp
Screw here.
— 35 —
Note :
Hold the cable using a wire
clamp to prevent the cut of wire.