ViewSonic SC-T35 User Manual page 161

Configuring Client Settings
Configuring Service Access Settings
Options Sub-tab
Window Settings
Item
Color Depth
Window Size
Window Mode
Device Mapping
Item
Mapping Local USB Storage
Mapping Local Serial Ports
Mapping local Printers
Connection Settings
Item
Rendering Type
Enable Automatic Reconnect
Number of Retries
Delay between Retries
Description
Click the drop-down menu to select the desired color quality for a Citrix ICA
session. Three options are available: 16 Bit, 24 Bit, and Automatic.
This item is available only when Regular Window is selected.
Click the drop-down menu to select the desired window size of a Citrix ICA
session. Four options are available: Full Screen, 1280x1024, 1024x768, and
800x600.
Click the drop-down menu to select the desired window mode. Two options are
available: Regular Window and Seamless Window.
Description
Click the drop-down menu to enable/disable the mapping of the local USB drive(s) in a
Citrix ICA session.
NOTE: You need to enable local USB storage drive(s) as well. See section "4.4.3
Configuring Settings for USB Storage Devices" on page 68 for details.
Click the drop-down menu to enable/disable the mapping of the local serial device(s)
in a Citrix ICA session. If Yes is selected, the locally attached serial device(s) will become
available in launched Citrix ICA sessions.
NOTE: This setting item is not applicable to your SC-T35. However, if you use a
serial-based barcode scanner, and attach it to your SC-T35 with a
serial-to-USB adapter, you need to enable this setting in order to use the
local barcode scanner in a delivered application.
Click the drop-down menu to enable/disable the mapping of the local printer(s) in a
Citrix ICA session. If Yes is selected, the locally attached printer(s) will become available
in launched Citrix ICA sessions.
NOTE: To enable locally attached printer(s), please refer to section "4.4.6
Adding a Local Printer" on page 71 for detailed instructions.
Description
Click the drop-down menu to select resources rendering on the endpoint or the
server. Two options are available: Server Rendering and Client Rendering.
NOTE: The Client Rendering option may not be available on your system.
Check/Uncheck to enable/disable automatic reconnecting after an ICA session
was interrupted.
Click the drop-down menu to select the number of retries, ranging from 1 to 10.
Click the drop-down menu to select the delay time between retries, ranging from
5 to 60 seconds.
150