Table of Contents
Advertisement
Configuring Email Settings
To configure email notifications
1.
2.
3.
Go to Main Menu > Setting > Network > Email.
On the Email page, select the Enable check box to enable email notifications for alarm
events.
Configure the following settings:
• SMTP Server
Enter the SMTP server address of the sender's email account.
• Port
The default TCP/IP port used for SMTP is 25.
• Anonymous
Select check box to hide the sender's address in sent email.
• User Name
Enter the user name of the sender's email account.
• Password
Enter the password of the sender's email account.
• Receiver
Enter the email address where you want to send the notification.
You can enter up to three email addresses.
• Sender
Enter the sender's email address.
• Title
Enter the email subject.
• Attachment
Select check box to enable sending an attachment with the email.
• Encrypt Type
Select an encryption type: None, SSL, or TLS.
• Event Interval
This is the interval for sending emails. Enter a time between 0 and
3600 seconds. 0 means that there is no interval.
• Health Enable
Select check box to enable a health check. The system sends a test
email to check the connection.
• Interval
This is the interval the DVR waits before sending out email
notifications after an event is detected. Enter a time between 0 and
1440 minutes. 0 means that there is no interval.
Configuring Network Settings | 75
800-19403 - A - 12/2014
Hide quick links:
Advertisement
Table of Contents
