Honeywell HRHM1041 User Manual page 80

80 | Performance Series HQA Digital Video Recorder User Guide
Configuring Automatic Registration Settings
You can set up the DVR to automatically register to a proxy server. You can then access the DVR
from a remote client via the proxy server.
To enable automatic registration to a proxy server
1.
2.
3.
4.
5.
6.
www.honeywell.com/security
Go to Main Menu > Setting > Network > Auto Register.
On the Auto Register page, select the Enable check box to enable automatic registration
to a proxy server.
Configure the following settings:
• Server IP Address Enter the proxy server address.
• Port Enter the proxy server port.
• ID Enter the device ID of the DVR.
Click Apply to save your settings.
If you want to exit the Setting menu, click Save.
Open the proxy server software, enter the global setup, and add the device. The device ID
should be the same as the ID shown on the Auto Register page. Restart the proxy server.
If the proxy server displays Y, then the registration was successful.