Problem: Motion detection does not work.
•
Increase the motion detection sensitivity. It may be set too low.
See
Configuring Motion Detection Settings
•
Make sure that the motion detection schedule is configured correctly.
See
Configuring Motion Detection Settings
•
Make sure that the motion detection zone setup is configured correctly.
See
Configuring Motion Detection Settings
Problem: The network connection is unstable.
•
Check that there is no IP address or MAC address conflict.
Problem: There is a USB backup error.
•
Check that the USB storage device has sufficient space available.
Problem: Alarm signal cannot be disarmed.
•
Make sure that the alarm settings are correctly configured.
•
Check the alarm cable connections.
•
Make sure that the DVR is running the latest firmware.
Problem: Alarm function is null.
•
Make sure that the alarm settings are correctly configured.
•
Check the alarm cable connections.
•
Check that you have not connected two loops to one alarm device.
Problem: Cannot play a downloaded file.
•
Use the player included on the software CD.
•
Make sure that you have DirectX8.1 or greater installed on your computer.
•
If you are using Windows XP, download the plug-ins DivX503Bundle.exe and
ffdshow-20041012.exe.
Troubleshooting | 141
on page 84.
on page 84.
on page 84.
800-19403 - A - 12/2014