Sequence Creation Flow; Getting Ready; Creating A Basic Pattern - Casio XW-PD1 Trackformer User Manual

Sequence Creation Flow

This section provides a general overview of sequence
creation steps.

1. Getting Ready

Selecting a Sequence Data File Number
While holding down the SEQ selector button, use pads
11 (–) and 12 (+) to specify a sequence data file number.
• Data file numbers 100 to 149 are rewritable by you.
There is no data assigned to these file numbers when
TRACKFORMER is shipped from the factory.
To delete data currently assigned to a
data file number
1.
While holding down the FUNCTION selector
button, press sequence step key 3 (CLEAR).
2.
Press the SEQ selector button and then
press pad 16 (ENT).

2. Creating a Basic Pattern

To assign a sound to a step
1.
Press the STEP selector button and then
press the PLAY button.
2.
Press the pad of the sound you want to
assign and then press the sequence step key
to assign the sound.
• If you don't want anything to sound when you press
a particular pad, hold down the STEP selector button
as you press the applicable pad.
NOTE
• For information about how to assign sound to a step
as you record it, refer to the "User's Guide (Basics)"
that comes with TRACKFORMER.
To assign tones and effects to all pads or
to a particular pad
NOTE
• For information about tone types that can be
assigned, refer to the "User's Guide (Basics)" that
comes with TRACKFORMER.
■ To assign to all pads
1.
While holding down the PADSET selector
button, use pad 13 (TYPE) to select a tone
type.
2.
While holding down the PADSET selector
button, use pads 11 (–) and 12 (+) to change
the tone.
■ To assign to a particular pad
1.
Press the pad whose tone you want to
change.
2.
While holding down the PAD selector button,
use pad 13 (TYPE) to select a tone type.
3.
While holding down the PAD selector button,
use pads 11 (–) and 12 (+) to change the tone
assigned to the pad you pressed in step 1.
EN-4