Mastering Trackformer Operations; Navigating Between Function Modes; Producing A Particular Sound Or Sounds - Casio XW-PD1 Trackformer User Manual

Mastering TRACKFORMER Operations

The FUNCTION mode lets you change the
configuration of a variety of different settings.
Navigating Between
FUNCTION Modes
1.
While holding down the FUNCTION selector
button, press the sequence step key that
corresponds to the mode you want to use.
• Entering a mode causes the FUNCTION button as
well as the pads and sequence step keys that are
enabled in the mode to light.
2.
To exit a FUNCTION mode, press the
FUNCTION button again.
To step back to the previous menu level, press the EXIT
selector button.
■ FUNCTION Mode List
Sequence Step Key Display
(Mode) Message
1 (SOLO)
2 (MUTE)
3 (CLEAR)
4 (COPY)
5 (KEY SHIFT)
(MAX STEP)
6
7 (SWING)
8 (MIDI CTRL)
(PATTERN
9
EDIT)
Description
For sounding a
particular sound only.
For muting a
particular sound.
For deleting data.
For copying data.
For changing the pitch
of a sequence.
For changing the
maximum number of
steps in a sequence.
For applying a swing
effect.
Enters the MIDI
control mode.
For changing the
configuration of a
pattern.
Sequence Step Key Display
(Mode) Message
10 (VELOCITY)
11 (PAD VOLUME)
12 (PAD ACTION)
13 (SLICE
LENGTH)
14 (MASTER EQ)
15 (METRONOME)
16 (SETTING)
Producing a Particular Sound
or Sounds
Use the procedure below when you want to produce
all of the sounds in a bank or the sound of a particular
pad in a bank.
1.
Enter the SOLO mode.
2.
Press the sequence step key that
corresponds to the number of bank whose
sounds you want to produce, or press the pad
whose sound you want to produce.
This causes the corresponding sound or sounds to be
produced.
• The soloing bank (sequence step key) or pad will
become lit.
3.
To cancel solo play, press the currently lit
sequence step key or pad.
Description
For changing the pad
velocity (degree of
volume level change).
For changing the pad
set volume level.
For changing the
operation of a pad
when it is tapped.
For changing the
initial default slice
length.
For adjusting the
master equalizer.
Toggles the
/
metronome between
on and off.
For other settings.
Banks 1 to 4
Pads 1 to 16
EN-9