Configuring Other Settings
This section explains how to configure global TRACKFORMER and sequence settings.
Configuring Settings
1.
While holding down the FUNCTION selector button, press sequence step key 16.
2.
Press the pad (1 through 6) that corresponds to the menu you want to access.
3.
Press pad 16 (ENT).
This displays the menu you selected.
4.
Press the pad that corresponds to the menu item you want to select.
This will cause the pad of the selected item to flash.
5.
Press pad 16 (ENT) to cycle through available settings.
• You can also use the VALUE knob to change the displayed setting.
• Pressing the EXIT button returns to the menu display in step 2 above.
Menu and Setting List
Pad Number, Display
Message
1
1
2
2
1
2
3
3
1
2
Menu for configuring and saving settings for each sequence. These settings are
not saved by the Auto Resume function.
Maximizer. Adjusts overall sound pressure.
Reverb Send. This parameter adjusts reverb.
Menu for configuring TRACKFORMER input and output audio settings.
Speaker Out. Off: Output from TRACKFORMER's speakers is disabled.
Stereo Imager. Outputs a stereo effect. A larger value increases the stereo effect.
Noise Gate. On: External input sound below a fixed level is cut, which reduces
noise.
Menu for configuring MIDI settings.
Local Control. Off: No sound produced when a pad is tapped.
MIDI Control. On: MIDI message input and output is enabled.
Overview
Settings
*
Off, 30, 60, 90
0, 10, 20, 40, 80,
*
127
Off, On
Off, T01, T02,
T03
Off, On
Off, On
Off, On
EN-17