Muting A Particular Sound Or Sounds; Deleting Data - Casio XW-PD1 Trackformer User Manual

NOTE
• You can solo play multiple banks or pads.
• When all banks or pads are lit (indicating all are
soloing), pressing any sequence step key or pad
switches to solo play of the corresponding bank or
pad only.
Muting a Particular Sound or
Sounds
Use the procedure below when you want to mute all of
the sounds in a bank or the sound of a particular pad in
a bank.
1.
Enter the MUTE mode.
2.
Press the sequence step key that
corresponds to the number of bank whose
sounds you want to mute, or press the pad
whose sound you want to mute.
This mutes the corresponding sound or sounds.
• The muted bank (sequence step key) or pad will
become unlit.
3.
To cancel muting, press the currently unlit
sequence step key or pad so it becomes lit.

Deleting Data

Use the procedures in this section to delete sequence,
pattern, bank, and pad data.
To delete a sequence
1.
Enter the CLEAR mode.
2.
Press the SEQ selector button.
3.
Press pad 16 (ENT).
This deletes the sequence data.
To delete a pattern
1.
2.
3.
Banks 1 to 4
To delete bank settings
Pads 1 to 16
1.
2.
3.
Mastering TRACKFORMER Operations
Enter the CLEAR mode.
Press the PATTERN selector button.
Press the sequence step key that
corresponds to the number of the pattern you
want to delete.
This will delete the pattern whose number matches that
of the key you pressed.
Enter the CLEAR mode.
Press the PADSET selector button.
Press the sequence step key whose number
corresponds to the bank you want to delete.
This deletes the sequence of the bank that corresponds
to the sequence key you pressed and returns the tone
and other settings to their initial defaults.
Delete pattern: Lit
Deleted bank: Lit
EN-10