Specifying the Number of
Beats and Sampling
You can use the procedure below to specify the
number of beats to be sampled in a range of 1 to 16, and
then sample a sound. The range of the number of beats
you can specify depends on the sample length and the
tempo.
1.
Enable Sampling Tempo Sync.
• For information about configuring this setting, see
"Configuring Settings" under "Configuring Other
Settings" (page EN-17), and "Sampling Tempo Sync"
under "Menu and Setting List" (page EN-17).
2.
Press the SAMPLING selector button.
3.
Press the pad to which you want to assign the
sampled sound.
4.
Press the sequence step key that
corresponds to the number of beats you want
to specify.
• The sequence step keys that correspond to the
supported number of beats settings will be lit.
• To cancel a number of beats setting, press the flashing
sequence step key so it stops flashing and remains lit.
5.
Press the REC selector button.
This starts recording.
6.
Play the sound you want to sample.
7.
Recording will stop when you press the REC
button again or after the specified number of
beats is exceeded.
• This assigns the sampled sound to the pad you
pressed in step 3.
Sampling Tutorial
EN-8