Cable Configuration For Quick Set C20 With Precisionhd 1080P 4X Camera - Cisco TelePresence C20 Administrator's Manual

Cisco TelePresence System Quick Set C20 and Profiles using C20
Contents
Cable configuration
for Quick Set C20 with
PrecisionHD 1080p 4x camera
The illustration shows you the basic setup when connecting
the monitor, PC, PrecisionHD 1080p 4x camera, microphone,
loudspeakers (if applicable), LAN and line voltage to the
Codec C20.
The early shipments of the Quick Set C20 came with an
interim version of the PrecisionHD 1080p 4x camera (the
PrecisionHD 1080p 4x* camera).
In order to be able to use the system for video calls,
all orange colored sockets must be connected.
The codec must be switched off and disconnected
from the line voltage whenever connecting or
disconnecting other equipment.
D14637.17 Profile C20 and Quick Set C20 Administrator Guide TC7.3, JULY 2015.
Introduction Web interface System settings
www.cisco.com — Copyright © 2010-2015 Cisco Systems, Inc. All rights reserved.
135
Administrator Guide
Setting passwords Appendices Appendices
HDMI HDMI