Footstand; Adjusting The Footstand; Video Camera; Enable Auto Transmit Video - Cisco 8945 Getting Started

Unified ip standard phone

Hide thumbs Also See for 8945:

Table of Contents

Footstand

The footstand at the back of your phone can be adjusted for a higher or lower viewing

angle, depending on your preferences.

To adjust the footstand, align the tabs on the back of the footstand with the two different

sets of holes.

The Standard Cisco Unified Video Phone (model 8945) has a camera attached that

allows you to make a video call with one or more other video phones at the University.

You can transmit your video automatically whenever a call is initiated or accepted. If a

video transmission is in progress, the light next to the camera turns green, and when on

video mute it turns red. The light next to the camera is turned off when the camera is not

in use.

1. Press the Applications button.

2. Select Preferences. (Use the Navigation pad and Select button to scroll and

select.)

3. Select Camera Settings > Auto Transmit Video option.

4. Select Yes to enable automatic video transmission or No to disable the

feature.

5. Press the 'Apply' soft key to apply the feature, or press the Return soft key

to return to the Set-up screen.

Self-View Video allows you to see the view from your camera when you are not in a video call.

Use Self-View video before making video calls to help set up and position your camera

effectively.

1. Press the 'Self View' soft key (you may need to press More soft key

first).

2. Tilt the lens up or down to correct the display.

3. Press the Exit soft key when finished.

Page 4

Table of Contents