Specifications - Makita DDF446 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model
Capacities
No load speed
-1
(min )
Overall length
Net weight
Battery cartridge
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Read instruction manual.
Cd Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household
waste material!
In observance
Directives,
Electronic Equipment and Batteries and
Accumulators and Waste Batteries and
Accumulators and their implementation
in accordance with national laws, electric
equipment and batteries and battery
pack(s) that have reached the end of
their life must be collected separately
and returned to an environmentally
compatible recycling facility.
Intended use
The tool is intended for drilling and screw driving in wood,
metal and plastic.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
Steel
Wood
Wood screw
Machine screw
High (2)
Low (1)
BL1415 / BL1415N
of the
on Waste Electric
) : 71 dB (A)
pA
DDF446
13 mm
38 mm
6 mm x 75 mm
M6
0 - 1,500
0 - 400
192 mm
1.5 kg 1.7 kg
BL1430 / BL1440
D.C. 14.4 V
END004-6
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode: drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
European
method and may be used for comparing one tool
and
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
ENE034-1
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
ENG905-1
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
2
DDF456
13 mm
38 mm
10 mm x 89 mm
M6
0 - 1,500
0 - 400
192 mm
1.5 kg
BL1815 / BL1815N / BL1830 / BL1840 /
BL1820
D.C. 18 V
2
) : 2.5 m/s or less
h,D
2
1.7 kg
BL1850
ENG900-1
ENG901-1