ViewSonic SC-T35 User Manual page 83

Using ViewSonic Device Manager
Managing All Your Clients
NOTE
• For information on the meanings of the Status icons, please refer to "3.4.7
Understanding Client Status Icons" on page 53.
Rebooting a Client Group through Your Local Network
To restart a client group through your local network, please do the following:
1. On Thin Clients tab, click Thin Clients to expand the Client Group tree.
2. Right-click on the desired client group to open a popup menu.
3. Click to select Reboot.
WARNING
• Ensure that no important tasks are performed on clients in the selected group.
4. On each client of this group, a warning message appears to notify the user of the planned reboot and allow
the user to cancel the action if necessary.
5. After completion, the Status icons will indicate clients of this group are on-line again.
NOTE
• For information on the meanings of the Status icons, please refer to "3.4.7
Understanding Client Status Icons" on page 53.
78