ViewSonic SC-T35 User Manual page 118

Tab Setting
Time and Date
(Time Zone)
Password
Firmware
Update *
Snapshot
Appliance Mode
Quick
Connection
System
Miscellaneous
Terminal
FBWF
UWF
Error Report
Certificate
Manager
Icon
Click to configure date and time settings.
Click to configure your password settings.
Click to update firmware through the network. This feature is only
applicable when this client is managed by the ViewSonic Device
Manager console.
Click to take a snapshot (system copy at a specific point of time)
for your client device, which you can use for mass deployment,
system backup, and recovery.
Click to enable/disable the Appliance mode to allow/disallow the
automatic Remote Desktop session. In Appliance mode, the client
starts up with the desired Remote Desktop session and shuts
down when the user logs off the session.
Click to enable/disable the Quick Connection mode after
system startup.
Click to change the host name of your client device.
Click to enable/disable the execution of the text-based
(command-line) functions.
Click to configure FBWF (File-Based Write Filter) settings. As a
file-based write filter, FBWF will intercept all write attempts to a
protected volume and redirect those attempts to a RAM cache.
After restart, all changes are discarded.
Click to configure UWF (Unified Write Filter) settings. As a
sector-based write filter, UWF will intercept all write attempts to
a protected volume and redirect those attempts to a RAM cache.
All system changes only affect the session where the changes are
made. After restart, all changes are discarded.
Click to collect event logs and launch the screen capturing
program for error reporting.
Click to import or manage certificates for remote computers.
113
Configuring Client Settings
Client Settings at a Glance
Description