Breville Juice Fountain Crush Instruction Booklet page 15

OPERATING yOUR BREvILLE PROdUCT
7. As the fruits and vegetables are
processed, juice will flow into the
juice jug and the separated pulp will
accumulate in the pulp container.
NOTE
The pulp container can be emptied
during juicing by turning the juicer
to the off position and removing the
pulp container. Replace the empty
pulp container into position before
continuing to juice.
WARNING
Do not operate juicer longer than 20
seconds before inserting ingredients.
8. Immediately after use, slowly pour a
glass of water down the feed chute.
Ensure that there is a separate jug under
the spout as the water will pour directly
into the juice jug that you juiced into.
This is a cleaning aspect and will help
when cleaning the filter basket.
NOTE
If you are making different fruit juices
you can pour a glass of water (about
6oz) in between the different juices
to rinse any left over flavors. It is not
always necessary to completely clean
the juicer in between making multiple
juices.
14
OvERLOAd PROTECTION
This protection device safeguards against
overloading the motor with excessive loads.
If overloading occurs, the motor will stop.
The overload protection will automatically
de-activate the motor. When this occurs,
unplug the power cord from the wall outlet
and allow the appliance to cool for at least 1
hour. Then reconnect the power cord to the
wall outlet. Then recommence normal use.