Obihai OBi1062 Administration Manual page 200

OutboundCallRoute After the caller dials a number that is acceptable by the AA (according
to its DigitMap) to make a further call, the device uses this outbound
call routing rule to determine which service to make this call with.
See OBi Call Routing and Digit Map Section for a description of the
syntaxes to specify this parameter.
PrimaryLine By primary line we mean the service that does not require any access
code prefix (such as **1 or **9) when dialing; it is the default service
to be used for making the call when no explicit access code prefix is
entered. This parameter indicates to the device which voice service is
considered as the primary line when dialing out via the Auto
Attendant. Available choices are:
SP1 Service
SP2 Service
SP3 Service
SP4 Service
SP5 Service
SP6 Service
OBiTALK Service
OBiBluetooth
Trunk Group 1
Trunk Group 2
The OBi device process the parameter by substituting of the
occurrences of pli and (Mpli) in DigitMap and OutboundCallRoute
with the corresponding code and (Mcode).
AnswerDelay Period of time in milliseconds that the AA will wait before answering
an incoming call that has been routed to it
NumberOnNoInput In the case that the caller does not enter any option from the top
level menu after the menu has been announced for 3 times, the AA
directs the caller to the number specified in this parameter. If this
number is not specified, the AA simply terminates the current call.
UsePIN Enable the use of PIN to authenticate callers when they select the
option to make a further call. If PIN1, PIN2, PIN3, and PIN4 are all
empty, device treats it as if UsePIN is set to No. Otherwise, the caller
must enter one of the non-empty PIN in order to proceed,
PIN1 PIN code to make a call (must be all digits). Maximum Length = 15
PIN2 PIN code to make a call (must be all digits).
Maximum Length = 15
PIN3 PIN code to make a call (must be all digits).
Maximum Length = 15
PIN4 PIN code to make a call (must be all digits). Maximum Length = 15
(code = sp1)
(code = sp2)
(code = sp3)
(code = sp4)
(code = sp5)
(code = sp6)
(code = pp1)
(code = bt1)
(code=tg1)
(code=tg2)
Copyright 2010-2015 Obihai Technology, Inc.
(Mpli))
{([1-9]x?*(Mpli)):pp},
{0:ph},
{(<**1:>(Msp1)):sp1},
{(<**2:>(Msp2)):sp2},
{(<**3:>(Msp3)):sp3},
{(<**4:>(Msp4)):sp4},
{(<**8:>(Mbt)):bt},
{(<**9:>(Mpp)):pp},
{(Mpli):pli}
SP1 Service
4000
0
Note: According to the default
DigitMap and OutboundCallRoute,
calling 0 means ringing the Phone
false
200