Itsp Profile X - Rtp Web Page (X = A, B, C, D, E, F); Voice Services; Spn Service Web Page (N = 1, 2, 3, 4, 5, 6) - Obihai OBi1062 Administration Manual

ITSP Profile X – RTP Web Page (X = A, B, C, D, E, F)
Parameter
RTP (VoiceService.1.VoiceProfile.k.RTP.), k = 1 – 6 for X = A – F, respectively
LocalPortMin
LocalPortMax
KeepAliveInterval
DSCPMark
X_UseSSL
RTCP (VoiceService.1.VoiceProfile.2.RTP.RTCP.), k = 1 – 6 for X = A – F, respectively
Enable
TxRepeatInterval
LocalCName
X_RTCPMux
Jitter Buffer (VoiceService.1.VoiceProfile.k.RTP.JIB.), k = 1 – 6 for X = A – F, respectively
Adaptive
MaximumSize
SetPoint
Target
AdaptationSlope

Voice Services

SPn Service Web Page (n = 1, 2, 3, 4, 5, 6)

The following configuration parameters are available on this page.
Parameter
(VoiceService.1.VoiceProfile.1.Line.n.), n = 1 – 6
SPn Service
Enable
X_DisplayLabel
X_DisplayNumber
X_ServProvProfile
X_RingProfile
X_CodecProfile
Description
Base of port range for tx/rx RTP with this SP
Top of port range for tx/rx RTP with this SP
Interval in seconds between sending keep alive packet on
an RTP channel that is currently in idle (due to call hold
for instance). RTP keepalive is disabled if the value of this
parameter is set to 0.
Diffserv code for outgoing RTP packets with this SP
Enable this option to force OBi to send RTP over a SSL
channel when the ITSP is Google Voice
Enable RTCP operation
Interval in milliseconds between RTCP transmissions
The local CNAME to use in RTCP message. By default OBi
uses account-userid@local-ip-address as the local
CNAME.
Enable RTCP-Mux operation (send and receive RTCP on
the same local port as the corresponding RTP)
Enable jitter buffer adaptation
Maximum jitter buffer size in milliseconds
Initial play out delay in milliseconds
Target play out delay in milliseconds
Maximum adaptation slope in samples per 10ms
Description
Enable this line
Select a Service Provider Profile for this service. Choices
are A, or B
Select a Ring Profile to ring the PHONE port with for
incoming calls on this service that are routed to the
PHONE port. The ringing pattern will be taken from the
given profile. Choices are A, or B
Select a Codec Profile for all calls on this service.
Copyright 2010-2015 Obihai Technology, Inc.
Default Setting
16600
16798
0
0
false
false
10000
false
true
250
60
20
16
Default
Setting
true
A
A
A
189