Obihai OBi1062 Administration Manual page 179

ConfigURL
DnsLookupType
DnsSrvPrefix
GPRM0 to GPRM7
TPRM0 to TPRM3
(X_DeviceManagement.X_UserDefinedMacro.n.), n = 0, 1, 2, 3
User Defined Macro n
($UDM0 – $UDM3)
Value
ExpandIn
SyntaxCheckResult
$MACRO Expansion Supported by the OBi Device
Macro Name Description
MAC Device MAC address, such as 9CADEF000000
MACC Device MAC address with colon, such as 9C:AD:EF:00:00:00
mac Device MAC address lower case, with colon, such as
9c:ad:ef:00:00:00
FWV Firmware version, such as 1.0.3.1626
HWV Hardware version, such as 2.8
hh:mm
+
[ rr] where:
hh
- : 0 – 23
mm
- : 0 – 59
+rr
- : (optional) maximum range of random delay in
minutes from 0 – 360. If not specifieid, the default is
30 minutes. Setting
delay.
URL of config file
Choices are:
- A Record Only
- SRV Record Only
- Try Both
Choices are:
- No Prefix
- With Prefix
- Try Both
Non-volatile generic parameters which can be referenced in other
parameters, such as ConfigURL
Temporary variables used in scripts for ConfigURL. Please refer to
OBi Device Provisioning Guide for examples on how to use these
variables
Any plain text, or reference to another parameter's full TR-104
name prepended by a '$'
A comma separated list of parameters that are allowed to use this
macro expansion. Each parameter must be specified using its full
TR-104 name. Specify ANY to allow it in all parameters.
This is read only status value regarding the syntax of the UDM.
"Pass" means that this UDM is valid. Otherwise, it shows the syntax
error detected by the device either in the Value or ExpandIn
parameters of the UDM.
Copyright 2010-2015 Obihai Technology, Inc.
rr
= 0 will remove the random
Where It Can Be Used
ANY
ANY
ANY
ANY
ANY
tftp://$DHCPOPT66/$MAC.xml
Note: Default value is blank for
OBiTALK Provisioning
A Record Only
No Prefix
179