Table of Contents
Advertisement
8. Kitting
Installation of the application on the terminal, initial settings and update of the OS are described in this section.
8.1 New Configuration of System
The methods of making new settings and installing the application on the terminal are described.
8.1.1 Flow of New Configuration
(1) Design the System
(2) Set Environment
(3) Install Application Software
(4) Replicate Environment to Other Terminal
(5) Set Specific Environment of Each Terminal
Figure 8.1
8.1.2 Design the system
Depending on the usage of the terminal, design the system to be required and application software to install.
It's recommended to design system with following points of view.
• Design for all terminals
• Design for each terminal
8.1.3 Set Environment
Make environment setting of the terminal.
There settings for the environment setting of the terminal are as follows:
1) Environment setting by the Settings tool
2) Setting the security for the administrator
3) Setting the security for general users
4) Setting the Job Menu
Configuration of the master unit
Configuration of the slave unit
Configuration of the master unit/ the slave unit
61
Advertisement
Table of Contents
