Select the Android tab, and enter the debugging project name in Project.
Figure 5.12
Switch to the Target tab, select Always prompt to pick device, and close the dialog with the Close button.
Figure 5.13
Set the USB drier as described in the Chapter 4. Connecting V-T500/V-N500 to PC before connecting the actual
terminal of V-T500/V-N500 and the PC.
5.4.2 Setting the Debug Configuration with the Emulator
Select Debug Configurations from the Run menu of Eclipse in the same way as the actual terminal of
V-T500/V-N500.
Enter the details of Android tab, the debugging project name, in the same way as the actual terminal of
V-T500/V-N500.
Figure 5.14
34