Change A Custom Service Or Application For Use In An Outbound Firewall Rule - NETGEAR D6100 User Manual

AC1200 WiFi DSL Modem Router—Essentials Edition Model D6100
Change a Custom Service or Application for Use in an
Outbound Firewall Rule
You can change an existing custom service or application for use in an outbound firewall rule.
Note: You cannot change a custom service or application that is assigned to
an outbound rule. You first must remove the service or application
from the rule (see
or remove the rule altogether (see
Rule on page 184).

To change a custom service or application:
1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. Type http://www.routerlogin.net.
A login screen displays.
3. Enter the user name and password for the modem router.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
4. Click the OK button.
The BASIC Home screen displays.
5. Select ADVANCED > Security > Firewall Rules.
The following figure shows two entries in the Service Table.
6. In the Service Table, select the radio button for the service or application.
7. Click the Edit Service button.
Manage Firewall Rules, Port Forwarding, and Port Triggering
Change an Outbound Firewall Rule
Remove an Outbound Firewall
187
on page 181)