NETGEAR D6100 User Manual page 104

AC1200 WiFi DSL Modem Router—Essentials Edition Model D6100
Add or Remove Devices from the Blocked List
If you set up an access list that allows all new devices to access your network but you want to
block some devices from accessing your network, you must specify the devices that you want
to block.

To add or remove devices that are blocked:
1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. Type http://www.routerlogin.net.
A login screen displays.
3. Enter the user name and password for the modem router.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
4. Click the OK button.
The BASIC Home screen displays.
5. Select ADVANCED > Security > Access Control.
The Access Control screen displays.
6. Click the View list of blocked devices not currently connected to the network link.
A table displays the detected device name, MAC address, and connection type of the
devices that are not connected and blocked from accessing the network.
7. To add a device to the blocked list, do the following:
a. Click the Add button.
The Add Blocked Device screen displays.
Control Access to the Internet
104