Draytek Vigor2860 Series User Manual page 102

QoS Type
PCR
SCR
MBS
After finished the above settings, click OK to save the settings
P o r t - b a
P o r t - b a
General page lets you set the first PVC. As to set the second PVC line, please click the
Port-based Bridge tab to open Bridge configuration page.
Available settings are explained as follows:
Item
Enable
P1 to P6
Vigor2860 Series User's Guide
Select a proper QoS type for the channel according to the
information that your ISP provides.
It represents Peak Cell Rate. The default setting is "0".
It represents Sustainable Cell Rate. The value of SCR
must be smaller than PCR.
It represents Maximum Burst Size.
value is 10 to 50.
s e d B r i d g e
s e d B r i d g e
Description
Check this box to enable that channel. Only channel 3 to 8
can be set in this page, for channel 1 to 2 are reserved for
NAT using.
It means the LAN port 1 to 6. Check the box to designate
the LAN port for channel 3 to 8.
92
The range of the