Reboot System - Draytek Vigor2860 Series User Manual
Vdsl2 security firewall
Hide thumbs
Also See for Vigor2860 Series:
- User manual (944 pages) ,
- Quick start quide (67 pages) ,
- Quick start manual (56 pages)
Table of Contents
Advertisement
Access List
After finished the above settings, click OK to save the configuration.
3
.
1
5
.
1
0
R
e
b
o
o
t
S
3
.
1
5
.
1
0
R
e
b
o
o
t
S
The Web user interface may be used to restart your router. Click Reboot System from System
Maintenance to open the following page.
Index (1-15) in Schedule Setup - You can type in four sets of time schedule for performing
system reboot. All the schedules can be set previously in Applications >> Schedule web page
and you can use the number that you have set in that web page.
If you want to reboot the router using the current configuration, check Using current
configuration and click Reboot Now. To reset the router settings to default values, check
Using factory default configuration and click Reboot Now. The router will take 5 seconds
to reboot the system.
Note: When the system pops up Reboot System web page after you configure web settings,
please click Reboot Now to reboot your router for ensuring normal operation and
preventing unexpected errors of the router in the future.
You could specify that the system administrator can only
login from a specific host or network defined in the list. A
maximum of three IPs/subnet masks is allowed.
IPv6 Address /Prefix Length- Indicate the IP address(es)
allowed to login to the router.
y
s
t
e
m
y
s
t
e
m
325
Vigor2860 Series User's Guide
Hide quick links:
Advertisement
Table of Contents
