Draytek Vigor2860 Series User Manual page 100

Available settings are explained as follows:
Item
WAN for Router-borne
Application
DSL Modem Settings
WAN Connection
Detection
PPPoE/PPPoA Client
Vigor2860 Series User's Guide
Description
Choose the router service for channel 5, 6 or 7.
Management - It can be specified for general management
(Web configuration/telnet/TR069). If you choose
Management, the configuration for this PVC will be
effective for Web configuration/telnet/TR069.
VoIP - It can be specified for VoIP only. If you choose
VoIP, the configuration for this PVC will be effective for
VoIP data transmitting and receiving.
VPI - Type in the value provided by ISP.
VCI - Type in the value provided by ISP.
QoS Type - Select a proper QoS type for the channel
according to the information that your ISP provides.
Protocol - Drop down the list to choose the one (PPPoE or
PPPoA) provided by ISP.
Encapsulation - Drop down the list to choose the type
provided by ISP.
PVC Redirect – Choose on PVC to be bound with such
WAN interface.
Add Tag – It is used to identify the usage of PVC, check
this box to invoke this setting. And type the number for
VLAN ID (number).
Such function allows you to verify whether network
connection is alive or not through ARP Detect or Ping
Detect.
Mode – Choose ARP Detect or Ping Detect for the system
to execute for WAN detection.
Ping IP – If you choose Ping Detect as detection mode, you
have to type IP address in this field for pinging.
TTL (Time to Live) – Displays value for your reference.
TTL value is set by telnet command.
Enter your allocated username, password and authentication
parameters according to the information provided by your
ISP.
ISP Name – Type in the name of your ISP.
Username – Type in the username provided by ISP in this
field. The maximum length of the name you can set is 80
characters.
Password – Type in the password provided by ISP in this
field. The maximum length of the password you can set is
48 characters.
PPP Authentication – Select PAP only or PAP or CHAP
for PPP.
Always On – Check it to keep the network connection
always.
Idle Timeout – Set the timeout for breaking down the
90