Cisco 860 Series Hardware Installation Manual page 19

Chapter 1 Product Overview
Figure 1-4
Figure 1-4
1 Data BRI
2 Primary WAN port—VDSL/ADSL over
ISDN
3 4-port 10/100 Ethernet switch
4 Serial port—console or auxiliary
5
PoE power connector—optional
1. BRI = Basic rate interface.
2. Ports 0 and 1 provide PoE with the optional PoE module installed.
Caution
Figure 1-5
Figure 1-5
1 Primary WAN port—VDSL/ADSL over
POTS
2 4-port 10/100 Ethernet switch
3
Serial port—console or auxiliary
4
PoE power connector—optional
1. 887VA-M has Annex M support.
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-04
shows the back panel details of the Cisco 886VA data router.
Back Panel of the Cisco 886VA Router
1 2
1
0
2
The primary WAN port is designed for an RJ-45 connector only. Damage to the primary WAN
port may occur if a non RJ-45 connector is inserted.
shows the back panel details of the Cisco 887VA and 886VA-M data router.
Back Panel of the Cisco 887VA and 887VA-M Router
1
1
2
3 4 5 6
6 Reset button
7 Power connector
8 Earth ground connection
9 Kensington security slot
2 3 4 5
5 Reset button
6 Power connector
7
Earth ground connection
8
Kensington security slot
Cisco 880 Series ISRs
7 8 9
6 7 8
1-5