Cisco 890 Series ISRs
•
Optional embedded Wi-Fi CERTIFIED™ dual radio 802.11a/b/g/n-compliant wireless AP
Optional 4-port PoE
•
Note
•
Security feature card (SFC) socket
•
DIMM expansion socket that can accept up to 512 MB of additional memory, for a total of 768 MB
system memory in Cisco 891 and 892 series ISRs, and a total of 1 GB system memory in
Cisco 892F series ISRs
Three reverse-polarity threaded Neill-Concelman (RP-TNC) connectors on the back panel for
•
non-captive dual-band WLAN antenna (wireless models only)
Supports the AIM2-CUE-K9 and AIM2-APPRE-104-K9
•
Gigabit Ethernet (GE) small-form-factor pluggable (SFP) port (Cisco 892F series ISRs only)
•
The following feature is located on the front panel:
•
Two USB 1.1 ports
Figure 1-10
Figure 1-10
1
LEDs
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
1-10
The Cisco 890 series ISRs can include an optional PoE module that provides power to
802.3af-compliant devices connected to ethernet ports 0 through 3. If this feature was not
configured with the factory order you must order and install it to enable the PoE function.
shows the front panel details of the Cisco 890 wireless router.
Front Panel of the Cisco 890 Series Wireless ISR
1
Chapter 1
2
USB ports
Product Overview
2
OL-16193-04