Honeywell LYNX Touch Series Installation And Setup Manual page 21

Type
Arm–Stay Special-purpose zone type used with 5800 Series
wireless pushbutton units.
Arm–Away Special-purpose zone type used with 5800
Series wireless pushbutton units.
Disarm Special-purpose zone type used with 5800
Series wireless pushbutton units.
No Alarm Response Assigned when no-alarm response is required
Silent Burglary Usually assigned to sensors or contacts on
exterior doors and windows where sirens are NOT
desired.
Monitor Can be assigned to any wireless zone used for
asset protection. Works as a dynamic monitor of a
zone fault/trouble (not alarm).
General Monitor Assigned sensors or contacts on doors and
windows or asset protection within the premises.
Used to track activity of the occupant and alert
occupant of the activity of others.
General Response Assigned sensors or contacts on doors and
windows or asset protection within the premises.
Used to track activity of the occupant and alert
occupant of the activity of others.
Resident Monitor Used to monitor a resident in an area deemed to
be dangerous by a caregiver.
Resident Response Used to monitor a resident in an area deemed to
be dangerous by a caregiver. Requires
acknowledgement by caregiver.
Trouble Used with Other response type
Garage (Burglary) Assigned to Automatic Garage Door applications.
Provides a status of the garage door close/open
real time state
Garage Monitor Assigned to Automatic Garage Door applications.
Provides a status of the garage door close/open
real time state
Function
- 21 -
LYNX Touch Installation and Setup Guide
Zone Response Type Definitions
Characteristics
• Exit delay regardless of the arming mode selected.
• System is armed in the STAY mode when the zone is activated.
• System is armed in the AWAY mode when the zone is activated.
• Disarms the system when the zone is activated.
•
No reports to the central station.
•
No keypad sounding or chime
• System can still be armed
• No display on the screen
• Instant alarm, with NO audible indication when is armed in the
AWAY, STAY, STAY NO DELAY, or AWAY INSTANT mode.
• Report sent to the central station.
•
Reports to the central station, if enabled.
•
Fault/restore events are logged by the system.
• Activity Zone No. and Zone Descriptor displayed on LCD.
•
Restore will be stored in event log.
•
No keypad sounding or chime
•
System can still be armed
• No reports to the central station.
• Fault/restore events are logged by the system.
• Monitors entry into a monitored area. Activates a one-time unique
chime sound and announcement when faulted.
• Activity Zone No. and Zone Descriptor displayed on LCD.
• No reports to the central station.
• Fault/restore events are logged by the system.
• Monitors entry into a monitored area. Activates a unique chime sound
and zone announcement when faulted.
• Activity Zone No. and Zone Descriptor displayed on LCD.
• System re-triggers audible sounding every ten seconds until
acknowledged (Off sequence or wireless key button).
• No reports to the central station.
• Monitors entry into a monitored area. Activates a unique chime sound
and zone announcement when faulted.
• Activity Zone No. and Zone Descriptor displayed on LCD.
• If programmed, triggers a voice message (follow me) report.
• Fault/Restore events are not logged by the system.
• No reports to the central station.
• Monitors entry into a monitored area. Activates a unique chime sound
and zone announcement when faulted.
• Activity Zone No. and Zone Descriptor displayed on LCD.
• If programmed, triggers a voice message (follow me) report.
• System re-triggers audible sounding every ten seconds until
acknowledged (Off sequence or wireless key button).
• Fault/Restore events are not logged by the system
• The system will provide a trouble sounding from the keypad (and a
central station report, if desired).
• Associated With Entry Delay #2 Programmed Time.
• Exit delays when armed in AWAY or STAY mode.
• No Entry Delay when armed in Away or Stay Instant modes
• System can be armed with zone in the faulted state. When the zone is
closed it will automatically be inclusive within protection points. If the
point is subsequently violated, it will initiate an alarm.
• Zone type can be bypassed by any User Code except Babysitter.
• Can be assigned to any wireless zone used for automatic "Garage
Door" Open/Close status.
• Will not initiate an alarm condition on the control.
• When zone is in the open state will display "FAULT."
• Does not report alarms to central station.
• Zone will chime if enabled to do so
• System can be armed if this zone type is in fault
• Zone can be Bypassed by a valid code except babysitter