Hardware - Honeywell Lynx Touch 5100 Frequently Asked Questions Manual

FAQ's
Does it matter what side the Z-Wave and WiFi boards are inserted?
•
Yes, the Z-Wave module must be installed on the telephone side of the board and the WiFi card must be
installed under the speaker
The L5100 will not will recognize the WiFi or Z-Wave module?
•
The card must be inserted when power down
•
Turn on Z-Wave or Wifi in programming, Reboot the panel again.
How do you reset the L5100 without powering down the system?
•
End user method: From the home screen, Select "Security", Select "More", Select "Tools", Enter the Master
Code, Select "Test", Select "Reboot".
•
Installer Method: From the home screen, Select "Security", Select "More", Select "Tools", Enter the Installer
Code, Select "Test", Select "Diagnostics", Select "Reboot".
Return to Table of Contents

Hardware

- 11 - Updated: 11/22/13