NEC Univerge SV8100 Features And Specifications Manual page 1836

Issue 12.0
Program
Program Name
Number
47-01-08 SV8100 InMail System Options –
Delay in Dialing Digital Pager
Callback Number
47-01-09 SV8100 InMail System Options –
Wait Between Digital Pager
Callout Attempts
2 - 1806
Description/Comments
Set the time delay (0~99 seconds)
that occurs just before VM8000
InMail dials the Digital Pager
Callback Number portion of the
Message Notification callout
number for a digital pager. Set this
delay so the pager service has
enough time to connect to the
digital pager before sending the
callback number. Your pager
service may be able to help you
determine the best value for this
option (0~99 seconds). When
placing a digital pager notification,
the system:
Seizes the trunk specified.
Dials the user-entered notification
number (in Message + OP + N).
Waits the 47-01-08: Delay in
Dialing Digital Pager Callback
Number interval.
Dials the number entered in
47-01-07: Digital Pager Callback
Number.
The system assumes that the
notification number completes
dialing approximately four
seconds after trunk seizure. This
means that, by default, the Digital
Pager Callback Number is dialed
into the pager service about 13
seconds after trunk seizure.
Set the minimum time between
unacknowledged or unanswered
digital pager Message Notification
callouts. (A subscriber
acknowledges a digital pager
notification by logging onto their
mailbox.)
After this time expires, VM8000
InMail tries the callout again (for
up to the number of times set in
47-01-14: Number of Callout
Attempts).
If the system dials the callout
number and the pager service is
busy, it retries the number in one
minute.
UNIVERGE SV8100
Assigned Data
1
0~99 (seconds)
(default = 9)
1~255 (minutes)
(default = 15)
VM8000 InMail
Level
2 3

