NEC Univerge SV8100 Features And Specifications Manual page 1635

UNIVERGE SV8100
Program
Program Name
Number
20-09-01 Class of Service Options
(Incoming Call Service) –
Second Call for DID/DISA/DIL/
E&M Override
20-09-07 Class of Service Options
(Incoming Call Service) – Call
Queuing
20-13-05 Class of Service Options
(Supplementary Service) –
Intercom Off-Hook Signaling
20-13-06 Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
20-13-34 Class of Service Options
(Supplementary Service) – Block
Manual Off-Hook Signaling
20-13-35 Class of Service Options
(Supplementary Service) – Block
Camp On
20-18-06 Service Tone Timers – Interval of
Call Waiting Tone
80-01-01 Service Tone Setup – Basic Tone
(39) Number
80-01-02 Service Tone Setup – Ring Busy
(39) Tone
Tone Override
Description/Comments
Turn Off or On an extension ability
to receive a second call from a
DID, DISA, DIL, or tie line caller.

With this option set to 1, the
destination extension must
be busy for a second DNIS
caller to ring through. If the
destination extension does
not have a trunk or CAP key
available for the second call
and a previous call is ringing
the extension but has not yet
been answered, the second
caller hears busy regardless
of this program setting.
Turn Off or On an extension user
ability to have calls queued if a call
rings the extension when it is
busy.
Turn Off or On an extension
ability to receive off-hook signals.
Allow a busy extension user to
Manually (0) or Automatically (1)
receive off-hook signals.
Turn Off or On an extension user
ability to block off-hook signals
manually sent from a co-worker.
Turn Off or On an extension user
ability to block callers from dialing
to camp-on.
#
Set the time between off-hook
signaling alerts.
Customize the service tones in the
system. Tone Override is tone 39.
Define Ring Busy Tone.
Assigned Data
1
0 = Off
1 = On
(default = 1 for
COS 1~15)

0 = Off
1 = On

(default = 1 for
COS 1~15)
0 = Off
1 = On

(default = 1 for
COS 1~15)
0 = Off
1 = On

(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0~64800 (seconds)
(default = 10)
Refer to Table 2-33
Service Tone Setup
Defaults, Program
80-01-01 on page
2-703
Refer to Table 2-34
Service Tone Setup,
Program 80-01-02 on
page 2-707
Issue 12.0
Level
2 3





2 - 1605