NEC Univerge SV8100 Features And Specifications Manual page 1697

UNIVERGE SV8100
Program
Program Name
Number
20-02-23 System Options for Multiline
Telephones – Phone Operation
Mode
20-01-10 System Options – Trunk Guard
Timer
20-02-12 System Options for Multiline
Telephones – Forced Intercom
Ring (ICM Call Type)
20-06-01 Class of Service for Extensions
20-08-05 Class of Service Options
(Outgoing Call Service) – Dial
Number Preview (Preset Dial)
20-08-09 Class of Service Options
(Outgoing Call Service) –
Hotline/Extension Ringdown
20-08-13 Class of Service Options
(Outgoing Call Service) – ISDN
CLIP
20-11-19 Class of Service Options (Hold/
Transfer Service) – Hold/
Extended Park
20-13-10 Class of Service Options
(Supplementary Service) –
Barge-In Monitor
UCB (Unified Communications for Business)
Description/Comments
Selects the Loop Key operation
like the UX5000 terminal, or the
CAP Key operation like the
SV8100 terminal.
Set to 0 when using UCB.
The time the system waits to seize
the next outside line after the
system releases an outside line.
Enable/Disable Forced Intercom
Ringing. If enabled, incoming
Intercom calls normally ring. If
disabled, Intercom calls
voice-announce.
Assign Class of Service (1~15) for
extensions.
Turn Off or On extension user
ability to use Dial Number Preview
(SV8100 Version 4000 (4.01),
UCB 5.0 SP4 and TSP 3.03 or
lower).
Turn Off or On Ringdown
Extension for extensions with this
COS.
Determine if the ISDN calling line
identity presentation and
screening indicators are to be
allowed.
Determine if an extension Class of
Service should either allow a
normal or extended Park.
(1 = Extended for Program
24-01-07).
Enable the extension Barge-In as
Speech or Monitor Mode.
Assigned Data
1
0 = Original operation
mode (CAP Key)
1 = UX5000 Special
operation mode (Loop
Key)
(default = 0)
0~64800 (seconds)

(default = 1)
Set to 0
0 = Disable (Voice)
1 = Enable (Signal)

(default = 0)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:

Extension port 101 =
Class 15
All other extension
ports = Class 1
0 = Off
1 = On

(default = 1 for
COS 1~15)
0 = Off
1 = On

(default = 0 for
COS 1~15)
0 = Off
1 = On

(default = 0 for
COS 1~15)
0 = Off
1 = On

(default = 0 for COS
1~15)
0 = Speech
1 = Monitor

(default = 0 for COS
1~15)
Issue 12.0
Level
2 3

2 - 1667