NEC Univerge SV8100 Features And Specifications Manual page 1496

Issue 12.0
Program
Program Name
Number
10-20-01 LAN Setup for External
Equipment – TCP Port
10-20-03 LAN Setup for External
Equipment – Keep Alive Time
14-01-06 Basic Trunk Data Setup – SMDR
Printout
14-04-01 Behind PBX Setup
15-01-03 Basic Extension Data Setup –
SMDR Printout
15-01-14 Basic Extension Data Setup –
SMDR Output of Maid Intercom
Calls
15-01-15 Basic Extension Data Setup –
SMDR Output of Answered
Intercom Calls
2 - 1466
Description/Comments
Define the TCP port (0~65535)
when communicating to the SMDR
(type 5).
Define the keep alive time for
communicating to external
equipment.
Have the system print or Not print
the trunk you are programming in
the SMDR printout. Refer to
Programs 35-01 and 35-02 for
SMDR printout options.
For ANI/DNIS, the following
additional setting is
recommended: Behind PBX = 0
(Stand Alone).
For each extension, enter 1 if
extension calls should print on the
SMDR report. Enter 0 if extension
calls should not print on the SMDR
report.
When set to 0 (Disable) it will not
record sent internal calls.
When set to 0 (Disable) it will not
record received internal calls.
UNIVERGE SV8100
Assigned Data
0~65535
default:
External Device 1 (CTI
Server) = 0
External Device 2
(ACD MIS) = 4000
External Device 5
(SMDR Output) = 0
External Device 6 (DIM
Output) = 0
External Device 11
(O&M Server) = 8010
External Device 12
(Traffic Report Output)
= 0
External Device 13
(Room Data Output for
Hotel Service) = 0
External Device 14
(IP-DECT Directory
Access) = 0
1~255 (seconds)
(default = 30)
0 = No Print Out
1 = Prints Out
(default = 0)
0 = Stand Alone
(Trunk)
1 = Behind PBX (PBX)
2 = Not Used
3 = CTX assume 9
(default = 0)
0 = Do not print on
SMDR report
1 = Include on SMDR
report
(default = 1)
0 = Disable
1 = Enable
(default = 0)
0 = Disable
1 = Enable
(default = 0)
Station Message Detail Recording
Level
1 2 3






