HIKVISION DS-2CC1181P(N)(-A) User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Security Camera
  5. DS-2CC1181P(N)(-A)
  6. User manual

HIKVISION DS-2CC1181P(N)(-A) User Manual

Day night box camera
Hide thumbs Also See for DS-2CC1181P(N)(-A):
Table of Contents

Advertisement

Quick Links

See also: Technical Manual
Day Night Box Camera· User Manual
Day Night Box Camera
User Manual
0

Advertisement

Table of Contents
loading

Related Manuals for HIKVISION DS-2CC1181P(N)(-A)

Summary of Contents for HIKVISION DS-2CC1181P(N)(-A)

  • Page 1 Day Night Box Camera· User Manual Day Night Box Camera User Manual...
  • Page 2 Day Night Box Camera· User Manual Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact the dealer. This manual applies to following cameras: Models Models DS-2CC1181P(N)(-A) DS-2CC1191P(N)(-A) DS-2CC11A1P(N)(-A) DS-2CC1112P(N)(-A) DS-2CC1172P(N)(-A) DS-2CC1182P(N)(-A) DS-2CC1192P(N)(-A) DS-2CC11A2P(N)
  • Page 3 Day Night Box Camera· User Manual this product. UL has only tested for fire, shock or casualty hazards as outlined in UL’s Standard(s) for Safety, UL60950-1. UL Certification does not cover the performance or reliability of the security or signaling aspects of this product. UL MAKES NO REPRESENTATIONS, WARRANTIES OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS...

  • Page 4: Regulatory Information

    Day Night Box Camera· User Manual Regulatory Information FCC Information FCC compliance: This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
  • Page 5 Day Night Box Camera· User Manual 2002/96/EC (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points.

  • Page 6: Safety Instruction

    Day Night Box Camera· User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into “Warnings” and “Cautions” Warnings: Serious injury or death may occur if any of the warnings are neglected.
  • Page 7 Day Night Box Camera· User Manual responsibility for problems caused by unauthorized repair or maintenance.) To reduce the risk of fire or electrical shock, do not expose this  product to rain or moisture. This installation should be made by a qualified service person ...
  • Page 8 Day Night Box Camera· User Manual The sensor may be burned out by a laser beam, so when any  laser equipment is being used, make sure that the surface of the sensor will not be exposed to the laser beam. Do not place the camera in extremely hot or cold temperatures ...

  • Page 9: Table Of Contents

    Day Night Box Camera· User Manual Table of Contents 1 Introduction ..............10 1.1 Product Features ............ 10 1.2 Overview ............... 13 1.2.1 Rear Panel (A) ..........16 1.2.2 Rear Panel (B) ..........17 1.2.3 Rear Panel (C)..........18 1.2.4 Rear Panel (D) ..........22 1.2.5 Rear Panel (E) ..........
  • Page 10 Day Night Box Camera· User Manual 3.1.14 Language Setting ........59 3.1.15 Camera Reset Setting........59 3.1.16 Defective Pixel Correct Setting..... 60 3.1.17 RS-485 Setting ........... 60 3.1.18 Save All/Exit ..........60 3.2 Menu Description (B)..........61 3.2.1 Menu Overview ..........61 3.2.2 Scene ............

  • Page 11: Introduction

    Day Night Box Camera· User Manual 1 Introduction 1.1 Product Features This camera adopts high performance sensor and advanced print circuit board design techno logy. It possesses of high resolution, low distortion, and low noise features, etc. It is extremely suitable for surveillance system and image process system.
  • Page 12 Day Night Box Camera· User Manual The features of DS-2CC1112/1172/1182/1192P(N)(-A) and DS-2CC11A2P(N) are as follows: Adopt high performance SONY CCD, and supply high definition  and clear image Low illumination, 0.001Lux@F1.2（F1.2， AGC ON）  Support day and night auto switch ...
  • Page 13 Day Night Box Camera· User Manual Support electronic image stabilization (EIS) to get steady and  clear image Support eclipse  Support BLC with programmable BLC area  Support auto white balance with high color rendition  Support auto electronic shutter control to adapt to different ...

  • Page 14: Overview

    Day Night Box Camera· User Manual 1.2 Overview The appearances of the cameras are as follows: Figure 1-1 Overview 1-Lock Screws: available both on top and bottom for ceiling mounting and wall mounting respectively. 2-Auto-Iris Drive Interface: It connects the lens to the auto drive circuit in the camera which outputs direct current to drive the iris.
  • Page 15 Day Night Box Camera· User Manual Figure 1-2 Side View 3-Lens: the optical lens adopted for the box camera (not provided. Please purchase a compatible lens for the camera). 4-Back Focus Lever: It is set to optimum status by default. You can also manually pull and adjust it for more accuracy focus.
  • Page 16 Day Night Box Camera· User Manual 2. Loosen the set screw of back focus lever. 3. Adjust the stick left and right until lens gets clear image 4. Lock the set screw. Video Power Damp- Damp+ Video Driver+ Driver- Figure 1-3 Pins of the Auto Iris Interface The auto iris interface is composed of four square pins as shown in Figure 1-3.

  • Page 17: Rear Panel (A)

    Day Night Box Camera· User Manual Note: DS-2CC1181/1191/11A1P(N)(-A) models don’t support VD driven mode. 1.2.1 Rear Panel (A) The rear panel of DS-2CC1181/1191/11A1P（N） models is shown as follows. Figure 1-4 Rear Panel （12V） Table 1-1 Rear Panel Description Items Description Joystick Used to control OSD The indicator is on,...

  • Page 18: Rear Panel (B)

    Day Night Box Camera· User Manual Items Description Power Interface 12V DC Video Output Grounding Screw 1.2.2 Rear Panel (B) The rear panel of DS-2CC1181/1191/11A1P （N） -A models is shown as follows. Figure 1-5 Rear Panel （12V and 24V）...

  • Page 19: Rear Panel (C)

    Day Night Box Camera· User Manual Table 1-2 Rear Panel Description Items Description Joystick Used to control OSD Alarm OUT, IN, GND Support alarm in and Interface out. Used to switch day/night D/N Interface mode externally Used for remote control RS-485 Interface by DVR, keyboard, etc.
  • Page 20 Day Night Box Camera· User Manual Figure 1-6 Rear Panel Table 1-3 Rear Panel Description Items Description 1Vp-p Composite Video Output Output (75Ω/BNC) Power Interface 12V DC Grounding Screw The indicator is on, PWR Indicator when the power is up. Dial-switch Used for adjust the...
  • Page 21 Day Night Box Camera· User Manual Items Description image parameters. If the auto iris lens is DD type, you can adjust the size of iris with this knob to get a better brightness LEVEL knob level. If the auto iris lens is VD type, this knob is invalid.
  • Page 22 Day Night Box Camera· User Manual Table 1-4 Dial-switch Name Description NAGC Normal AGC: Normal auto gain control. SAGC Super AGC: Super auto gain control. Flickerless: The image flickers when the power is different (such as the PAL and NTSC system). You can turn this switch to ON to improve the image.

  • Page 23: Rear Panel (D)

    Day Night Box Camera· User Manual 1.2.4 Rear Panel (D) The rear panel of DS-2CC1112/1172/1182/1192P(N)-A models is shown as follows. Figure 1-7 Rear Panel Table 1-5 Rear Panel Description Items Description 1Vp-p Composite Video Output Output(75Ω/BNC)；...
  • Page 24 Day Night Box Camera· User Manual Items Description Support both 12V DC Power Interface and 24V AC. Grounding Screw The indicator is on, PWR Indicator when the power is up. Used for adjust the Dial-switch image parameters. If the auto iris lens is DD type, you can adjust the size of iris with this knob to get a...
  • Page 25 Day Night Box Camera· User Manual Items Description invalid. The camera supports DD(DC Drive) VD(Video Drive) iris driven modes. If the auto iris lens is DD type, you need to DD and VD Switch turn the switch to DD side. If the auto iris lens is VD type, you need to turn the switch to VD...
  • Page 26 Day Night Box Camera· User Manual Name Description Back light compensation: The exposure value for compensating back light will adjusted automatically when this feature is enabled. Auto iris: Please turn switch to AI when auto iris lens is used. Auto electronic shutter: Please turn switch to AES when auto iris lens is not used.

  • Page 27: Rear Panel (E)

    Day Night Box Camera· User Manual 1.2.5 Rear Panel (E) The rear panel of DS-2CC1183/1193/11A3/1185/1195/11A5/1187/1197/11A7/118 8/1198/11A8P(N)-A models is shown as follows. Figure 1-8 Rear Panel Table 1-7 Rear Panel Description Items Description Alarm OUT, IN, GND Support alarm in and Interface out.
  • Page 28 Day Night Box Camera· User Manual Items Description Used switch D/N Interface day/night mode externally Used remote RS-485 Interface control DVR, keyboard, etc. Output up to 700 TVL Video Output high-definition video. Support both 12V DC Power Interface and 24V AC. The indicator is on, PWR Indicator when the power is up.

  • Page 29: Rear Panel (F)

    Day Night Box Camera· User Manual 1.2.6 Rear Panel (F) The rear panel of DS-2CC1183/1193/11A3/1185/1195/11A5/1187/1197/11A7/118 8/1198/11A8P(N)-C models is shown as follows. Figure 1-9 Rear Panel Table 1-8 Rear Panel Description Items Description Joystick Alarm OUT, IN, GND Support alarm in and...
  • Page 30 Day Night Box Camera· User Manual Items Description Interface out. Used switch D/N Interface day/night mode externally Used remote RS-485 Interface control DVR, keyboard, etc. Output up to 700 TVL Video Output high-definition video. The indicator is on, PWR Indicator when the power is up.

  • Page 31: Installation

    Day Night Box Camera· User Manual 2 Installation Before you start: Please make sure that the device in the package is in good condition and all the assembly parts are included. 2.1 Wall Mounting Steps: 1. Rotate the lens clockwise onto the lens mount of the camera. 2.
  • Page 32 Day Night Box Camera· User Manual Figure 2-1 Lens Installation 3. Attach the camera to the fixing metal plate and fix t hem together with a 1/4# screw. Note: Please install the camera correctly to avoid a reversed image displayed in the monitor.
  • Page 33 Day Night Box Camera· User Manual Figure 2-2 Install the Metal Plate 4. Install the camera with the metal plate to the housing and fix them with screws.
  • Page 34 Day Night Box Camera· User Manual Figure 2-3 Housing Installation 5. Connect the power supply and video output and cover the housing. For more details, please refer to the user manual of the housing. 6. Attach the wall mount to the wall and tighten the screws to fix Notes: The wall mount (not provided) should be longer than 1/2 of the ...
  • Page 35 Day Night Box Camera· User Manual pipe on the wall should align w ith the mounting hole on the bracket. For wooden wall mounting, you can just use the self-tapping  screw to fix the bracket. Figure 2-4 Install the Wall Mount 7.
  • Page 36 Day Night Box Camera· User Manual Figure 2-5 Wall Mounting 8. Loosen the panning lock screw. You can adjust the panning angle of the camera (Figure 2-6). 9. Loosen the tilting lock screw. You can adjust the tilting angle of the camera (Figure 2-7).
  • Page 37 Day Night Box Camera· User Manual Figure 2-6 Panning Figure 2-7 Tilting...

  • Page 38: Wiring

    Day Night Box Camera· User Manual 10. After wiring the camera properly, display the live view of the camera using a monitor. 11. Move the zoom lever between T (Telephoto) and W (Wide angle) to obtain the appropriate angle of view. 12.
  • Page 39 Day Night Box Camera· User Manual Monitor Power Figure 2-8 Wiring...

  • Page 40: Menu Operations

    Day Night Box Camera· User Manual 3 Menu Operations 3.1 Menu Description (A) Note: The menu described in this chapter is applicable to DS-2CC1181/1191/11A1P(N)(-A). 3.1.1 Menu Overview This series of camera supports OSD menu operation. The menu is listed below: Table 3-1 Menu Tree LENS AUTO, MANUAL...

  • Page 41: Lens Settings

    Day Night Box Camera· User Manual PRIVACY AREA SEL, COLOR, TRANSP, MOSAIC DAY/NIGHT AUTO, COLOR, B/W, EXT1, EXT2 Y LEVEL CAMERA ID SYNC INT , LINELOCK LANGUAGE English/Chinese/Japanese/ French/Russian/Portuguese /Spanish/German CAMERA RESET EXIT/SAVE ALL Note: You can use the menu button on the rear panel to operate the OSD menu.
  • Page 42 Day Night Box Camera· User Manual  In auto mode, if the luminance level of the scene is high, the camera mainly adjusts the iris and shutter to get the proper brightness. If the luminance level of the scene is low, the camera mainly adjusts the AGC level to get the proper brightness.

  • Page 43: Shutter/Agc Setting

    Day Night Box Camera· User Manual In OPEN mode, the iris size is adjusted to the maximum value. In CLOSE mode, the iris is closed. SPEED Adjust the auto iris speed. The value is higher, the iris speed is faster. The value ranges from 0 to 255.
  • Page 44 Day Night Box Camera· User Manual and 1/10k are selectable for PAL standard. 1/60, 1/100, 1/250, 1/500, 1/1k, 1/4k, and 1/10k are selectable for NTSC standard. The AGC value can be set between 6 and 44.8. AUTO SETUP HIGH LUMINANCE MODE SHUT+AUTO IRIS/AUTO IRIS...
  • Page 45 Day Night Box Camera· User Manual In HIGH LUMINANCE condition, to get the proper image brightness, the SHUTTER speed and AUTO IRIS level is modified automatically according to the BRIGHTNESS value. MODE If you set the mode to SHUT+AUTO IRIS, the SHUTTER and AUTO IRIS values are adjusted together to get the proper image brightness.

  • Page 46: White Balance Setting

    Day Night Box Camera· User Manual 3.1.4 White Balance Setting Move the cursor to the White Balance, and select ATW, PUSH, PUSH LOCK, USER1, USER2, ANTI CR or MANUAL by setting the joystick left/right. ATW(Auto Tracking White Balance)  In ATW mode, white balance is continuously being adjusted in real-time according to the color temperature of the scene.
  • Page 47 Day Night Box Camera· User Manual SPEED ------|--239 DELAY CNT --|------016 ATW FRAME × 1.00 ENVIRONMENT INDOOR RETURN8 Figure 3-4 ATW USER 1/USER2  USER 1 mode is mainly for the indoor environment. B-Gain and R-Gain values are adjustable. USER 2 mode is mainly for the fluorescent light environment. B-Gain and R-Gain values are adjustable.
  • Page 48 Day Night Box Camera· User Manual In MANUAL WB submenu, you can customize the color temperature by adjusting the LEVEL value manually. The value ranges from 0 to 255. MANUAL WB LEVEL - - - | - - - 064 RETURN8 Figure 3-6 MANUAL WB PUSH...

  • Page 49: Backlight Setting

    Day Night Box Camera· User Manual Selecting this mode, the system suppresses the color rolling and gets the color balance simultaneously under the fluorescent light environment. 3.1.5 Backlight Setting This menu allows you to compensate light for certain position of the image.
  • Page 50 Day Night Box Camera· User Manual This feature enhances the difference in color and light between parts of an image. The value ranges from 0 to 255. SHARPNESS  SHARPNESS describes the clarity of detail in the image. The value ranges from 0 to 255.

  • Page 51: Atr Setting

    Day Night Box Camera· User Manual 3.1.7 ATR Setting ATR is the digital dynamic range function which can adjust the brightness and contrast level of the image, and balance the brightness level of the whole image. Move the cursor to ATR. Set the menu button left/right to select ON or OFF.
  • Page 52 Day Night Box Camera· User Manual Steps: 1. Move the cursor to MOTION DET, and select ON and press the menu button to enter the submenu. 2. Position the cursor on DETECT SENSE, and set the menu button left/right to adjust the sensitivity level. 3.
  • Page 53 Day Night Box Camera· User Manual 3. Position the cursor on MONITOR AREA. Select OFF to disable area motion detection. Select ON to enable area motion detection. 4. Position the cursor on AREA SEL to select one area. There are four areas available.

  • Page 54: Privacy Mask Setting

    Day Night Box Camera· User Manual 3.1.9 Privacy Mask Setting This feature allows you to cover certain areas which you don’t want them to be viewed or recorded. Steps: 1. Move the cursor to PRIVACY, and press the menu button to enter the PRIVACY submenu.

  • Page 55: Day/Night Setting

    Day Night Box Camera· User Manual PRIVACY AREA SEL ----|---- 128 BUTTOM ----|---- 128 LEFT ----|---- 128 RIGHT ----|---- 128 COLOR TRANSP 0.00 MOSAIC RETURN8 Figure 3-10 PRIVACY Note: When the motion detection is on, up to 4 privacy areas are configurable.
  • Page 56 Day Night Box Camera· User Manual 1. After moving the cursor to DAY/NIGHT, set the menu button left/right to select AUTO. 2. Press the menu button to enter the submenu. BURST Select ON or OFF to enable or disable this feature. DELAYCNT The value ranges from 0 to 255.

  • Page 57: Nr Setting

    Day Night Box Camera· User Manual Figure 3-11 DAY/NIGHT B/W Mode Setting In the B/W submenu, you can enable or disable the BURST. BURST RETURN8 Figure 3-12 B/W EXT1/EXT2 Mode Setting When you select EXT1 or EXT2 mode, you can use photo-resistor to switch the day/night mode externally.

  • Page 58: Camera Id Setting

    Day Night Box Camera· User Manual Y LEVEL - - - | - - - 004 RETURN8 Figure 3-13 NR 3.1.12 Camera ID Setting From Camera ID submenu, you can customize the camera ID. It also allows you to adjust the camera ID position on the monitor screen.
  • Page 59 Day Night Box Camera· User Manual Modifying the camera ID Steps: 1. Position the cursor on one of the arrows. 2. Press the menu button to position the cursor on the character that needs to be modified. 3. Select one of the other characters to replace it. Clearing the camera ID Steps: 1.

  • Page 60: Sync Setting

    Day Night Box Camera· User Manual 3.1.13 SYNC Setting Both internal and line lock synchronization are available. Note: Only the camera which supports both DC 12 V and AC 24 V has line lock synchronization. If 12V DC power supply is applied, SYNC mode is internal ...

  • Page 61: Defective Pixel Correct Setting

    Day Night Box Camera· User Manual 3.1.16 Defective Pixel Correct Setting Exit the main menu and in the live view interface, set the menu button to left for about 2 seconds to enable auto DPC function. Note: This function is more active in the absolutely dark environment.

  • Page 62: Menu Description (B)

    Day Night Box Camera· User Manual Move the cursor to SAVE ALL, and press menu button to save the settings and exit. 3.2 Menu Description (B) Note: The menu described in this chapter is applicable to DS-2CC1183/1193/11A3/1185/1195/11A5/1187/1197/11A7/118 8/1198/11A8P(N)-A(-C). 3.2.1 Menu Overview This series of camera supports OSD.

  • Page 63: Scene

    Day Night Box Camera· User Manual Note: You can use the menu button on the rear panel to operate the OSD menu. 3.2.2 Scene There are 6 scenes selectable: INDOOR STD, INDOOR BACKLIGHT, OUTDOOR, LOW LUMINANCE, IRSTD and CUSTOMIZE. You can select one of the scenes according to the application environment.
  • Page 64 Day Night Box Camera· User Manual 2. Position the cursor on LENS in the LENS SETUP menu. ELC, ALC, and ELC+ALC are selectable.  ELC If you choose ELC, the camera adjusts the electronic shutter value automatically according to the VALUE setting. The iris is opened to the maximum size.
  • Page 65 Day Night Box Camera· User Manual LENS SETUP ▽ LENS VALUE - - |- - 007 CONTRAST - - |- - 007 RETURN Figure 3-16 LENS SETUP BLC/WDR/HLC Setting (Back Light Compensation/Wide Dynamic Range/High Light Compensation) Notes:  Only DS-2CC1187/1197/11A7P(N)-A(-C) support WDR. ...
  • Page 66 Day Night Box Camera· User Manual 3. You can set the AREA and the brightness VALUE of BLC in this menu.  The AREA can be set to UP, DOWN, LEFT, RIGHT, CENTER, CUSTOMIZE. When you select CUSTOMIZE, the SIZE and POSITION menu items will display under the AREA item.
  • Page 67 Day Night Box Camera· User Manual 1. Move the cursor to BLC/WDR, and press the menu button to enter the BLC/WDR menu. 2. Position the cursor on the WDR, and press the menu button to enter the WDR settings menu. 3.
  • Page 68 Day Night Box Camera· User Manual High Light Compensation  Purpose: HLC makes the camera identify and suppress the strong light sources that usually flare across a scene. This makes it possible to see the detail of the image that would normally be hidden. Steps: 1.
  • Page 69 Day Night Box Camera· User Manual DAY/NIGHT Setting Move the cursor to DAY/NIGHT and press menu button to enter the DAY/NIGHT edit mode. DAY, NIGHT, and AUTO mode are selectable. Steps: 1. Move the cursor to DAY/NIGHT, press the menu button to enter the DAY/NIGHT SETUP menu.
  • Page 70 Day Night Box Camera· User Manual Note: When the IR SWITCH is on, the camera w ill be in the night mode for one hour if the day mode switches to night mode 5 times continuously in 10 minutes. One hour later, the camera detects the illumination of the environment, and switches to the day mode if the illumination reaches to the N→D LEVEL value.
  • Page 71 Day Night Box Camera· User Manual  SHUTTER: You can set the shutter to OFF, 1/120, 1/175, 1/250, 1/500, 1/750, 1/1K, 1/2K, 1/4K, 1/10K and 1/100K. Note: the value varies depending on the different camera models.  SLOW SHUTTER: The SLOW SHUTTER can be set to OFF, ×...
  • Page 72 Day Night Box Camera· User Manual AGC (Auto Gain Control) When the light of the scene decreases to a certain value, the AGC function w ill take effect to adjust the brightness of the image. The AGC function can be set to OFF, HIGH, MID or LOW. FLICKERLESS This function can avoid the image flicker.

  • Page 73: Funtion

    Day Night Box Camera· User Manual 3. Move the cursor to RETURN, press the menu button to return to the previous menu. Note: The back light compensation is disabled when the digital WDR is enabled. The digital WDR is disabled when the back light compensation is enabled.
  • Page 74 Day Night Box Camera· User Manual  If 12V DC power supply is applied, SYNC mode is internal synchronization and not adjustable.  If 24V AC power supply is applied, you can select either internal or line lock synchronization. WHITE BALANCE ...
  • Page 75 Day Night Box Camera· User Manual WHITE BALANCE MODE MANUAL▽ ◄ ► TEMP RETURN Figure 3-23 MANUAL WHITE BALANCE 3D-NR  Three Dimensional Digital Noise Reduction You can turn this function on to reduce the no ise in the image. The reduce value ranges from 0 to 7.
  • Page 76 Day Night Box Camera· User Manual Turning the ANTI-SHAKE function on may reduce the image vibration caused by external environment. Note: When the ANTI-SHAKE function is enabled, the MOTION DET function is disabled.
  • Page 77 Day Night Box Camera· User Manual MOTION DET  Steps: 1. Move the cursor to MOTION DET, and press the menu button to enter the submenu. 2. Move the cursor to MODE, and press the menu button to select OFF or ON to disable or enable the function. MOTION DET SETUP ▽...
  • Page 78 Day Night Box Camera· User Manual 4. Position the cursor on the SENSITIVITY. You can set the sensitivity level of the motion detection. The value ranges from 0 to 7. 5. Move the cursor to RETURN, press the menu button to return to the previous menu.
  • Page 79 Day Night Box Camera· User Manual 5. Move the cursor on COLOR to select the color you want. There are eight colors available. 6. Turn the MOSAIC on, if you want a mosaic mask area. 7. Move the cursor to RETURN, press the menu button to return to the previous menu.
  • Page 80 Day Night Box Camera· User Manual Note: The DIGITAL ZOOM is disabled when the ANTI-SHAKE function is ON. DIGITAL ZOOM RATIO DIGITAL ZOOM RATIO POSITION ENTER RETURN X 16 Figure 3-26 DIGITAL ZOOM SETUP MIRROR  If you turn the MIRROR function on, the image will be flipped. It is like the image in the mirror.
  • Page 81 Day Night Box Camera· User Manual Eclipse masks strong light sources that usually flare across a scene. This makes it possible to see the detail of the image that would normally be hidden. The VAULE ranges from 0 to 7. The value is larger, the mask is darker.

  • Page 82: System

    Day Night Box Camera· User Manual IRIS ADJUST ▽ MODE MANUAL DAMP ---|--- RETURN Figure 3-28 IRIS ADJUSTING 3.2.5 System CAMERA ID  In the CAMERA ID submenu, you can customize the camera ID. It also allows you to adjust the camera ID position on the screen of the monitor.
  • Page 83 Day Night Box Camera· User Manual 3. Press the menu button to enter your selection. The selected character displays under the CAMERA ID and above the characters. 4. Repeat the steps 1 through 3 to select other characters. Modifying the camera ID Steps: 1.
  • Page 84 Day Night Box Camera· User Manual CAMERA ID ▽ CAMERA ID - - - - - - - - - - - - - - ABCDEFGHIJKLMNOPQRSTUV WXYZ0123456789-!”#$%&’ ()_`,:;<=>?@\^*.x+/ ← → CLR POS RETURN Figure 3-29 CAMERA ID RS-485 Setting  If you need to configure the menu items remotely, you have to set the RS-485 parameters of control device the same as those of camera.
  • Page 85 Day Night Box Camera· User Manual RS485 SETUP ADDRESS |------ ----- 000 PROTOCOL PELCO D ▽ ▽ BAUDRATE 9600 RETURN Figure 3-30 RS485 SETUP SYSTEM INFO  SYSTEM INFO menu displays the hardware, software and DSP version. This information cannot be changed in this menu. It is the reference for maintenance or modification in the future.

  • Page 86: Language

    Day Night Box Camera· User Manual 1. Move the cursor to CAMERA RESET, press the menu button to enter the submenu. 2. Position the cursor on ENTER, press the menu button to reset the parameters of the camera to the factory settings. Or position the cursor on CANCEL, press the menu button to return to the previous menu.
  • Page 87 Day Night Box Camera· User Manual  CANCEL: Select CANCEL and press the menu button to cancel all the settings. 3. Position the cursor on RETURN, press the menu button to return to the submenu.

  • Page 88: Appendix

    Day Night Box Camera· User Manual Appendix 1 Glossary Note: The glossary gives brief explanations to the basic operation principle or the basic function of the camera. However, it doesn’t mean the listed functions are all supported by the cameras mentioned in this manual.

  • Page 89: Motion Detection

    Day Night Box Camera· User Manual S/N ratio: It is the ratio of Signal voltage to noise voltage. The ratio is larger, the effect of noise is less, a nd the image is clearer. White Balance: White balance can remove the unrealistic color casts. White balance is the white rendition function of the camera to adjust the color temperature according to the environment automatically.
  • Page 90 Day Night Box Camera· User Manual OSD is the texts superimposed on a screen. It can show the menu on the screen. Synchronous System: There are two modes for the camera synchronization. Internal synchronization is realized by the synchronous signal which is generated by the inside crystal oscillator.

  • Page 91: Digital Zoom

    Day Night Box Camera· User Manual HLC makes the camera identify and suppress the strong light sources that usually flare across a scene. This makes it possible to see the detail of the image that would normally be hidden. Digital Zoom: Digital zoom helps to crop the entire image, and then digitally enlarge the size of a portion of image that is needed to zoom in on.

  • Page 92: Troubleshooting

    Day Night Box Camera· User Manual 2 Troubleshooting Problem 1: Why does the camera restart intermittently? And the problem is much more serious when infrared lights of IR camera are turned on at night. Possible Reasons: The main and common reason is power supply shortage. This problem may happen to the IR camera especially at night, because the infrared lights are turned on at night and increase the power consumption.
  • Page 93 Day Night Box Camera· User Manual Problem 3: The camera is installed w ith an auto-iris lens. You adjust the focus to get a clear image in the daytime. But the image is defocused at night. Possible Reasons: In the daytime, the illumination is high, so the iris is adjusted to a small size automatically.
  • Page 94 Day Night Box Camera· User Manual To Solve the Problem: Check the auto-iris lens connector to ensure good contact. Set the iris driven mode of the camera the same as that of lens. The modes can be VD (video drive) or DD (direct drive). DD mode is commonly used.

  • Page 95: Technical Maintenance

    Day Night Box Camera· User Manual 3 Technical Maintenance Lens Maintenance The lens surface is plated an anti-reflection coating. The dust, oil and finger print, etc. w ill cause scratch, mildewed and performance degraded. Please refer to the following method to clean the lens.
  • Page 96 Day Night Box Camera· User Manual 3. Change the cloth to wipe the bubble until the bubble is clean. Glass Maintenance of IR Camera Steps: 1. Wipe off the dust, water-drop or oil by soft cloth and dry the glass. 2.
  • Page 97 Day Night Box Camera· User Manual...

This manual is also suitable for:

Ds-2cc1191pn-aDs-2cc1172pn-aDs-2cc1182pn-aDs-2cc11a1pn-aDs-2cc1192pn-aDs-2cc11a2pn ... Show all

Table of Contents