Download Print this page

Honeywell Evohome Installation Manual page 33

Controller
Hide thumbs Also See for Evohome:

Advertisement

evohome Installation Guide
Battery Powered Wireless Devices
Battery powered devices need to be put into
test mode to send and receive a test signal:
Radiator Controller (HR92)
Press the
button, the zone name is displayed
1
Press and hold the
2
Turn the dial to display RF CHECK
3
Press the
button
4
The evohome Controller will display the signal strength
(poor to excellent) and the Radiator Controller will display
a signal strength bar and a rating from 1 (poor) to 5
(excellent) – 0 means the Radiator Controller has not
received a test signal from the evohome Controller.
To exit test mode turn the dial to exit and press the
5
button. It will exit automatically after 10 minutes.
1
2
button again for 5 seconds
3
4
31

Advertisement

loading