Honeywell Evohome Installation Manual page 28

26
Underfloor Heating Controller (HCE80 or HCC80) continued
Step 3: Power up and bind devices
Then on the underfloor controller
Press the bind button
1
comes on and the zone number light flashes red
On the evohome Controller, press the green bind button
2
If the zone light turns solid green the binding is successful
If the zone light turns solid red continue with these
instructions
Press the back arrow on the evohome Controller
3
Press the bind button
4
Controller – the zone light should flash green
On the evohome Controller, press the green bind button
5
The zone light on the Underfloor Heating
6
Controller should now be solid green
You should receive a SUCCESS message on the
6
evohome Controller (if not go back and re-bind)
1
until the bind button light
on the Underfloor Heating
PRESS
ONCE