Honeywell Evohome Installation Manual page 17

3
2
evohome Installation Guide
Install the Radiator Controllers (HR92)
Locate the room (zone) for the radiator controller
1
Slide the locking mechanism to the unlock position
2
Remove the adaptor from the bottom of the controller
3
Unscrew the black wheel fully anticlockwise
4
Remove any existing control on the radiator valve
5
Screw the white end of the adaptor on to the radiator valve
6
Push the controller fully on to the adaptor
7
with the screen facing towards you
Slide the locking mechanism to the locked position
8
3 4
REMOVE
ROTATE
7
15