Honeywell 7000 Product Data page 22

HONEYWELL 7000 SOLID STATE ALARM SYSTEM
CANCEL
Press this key to cancel a menu selection or operation. If you
are at a menu selection the cancel key allows you to backup
to the previous screen.
CONTEXT SENSITIVE HELP
During any keypad interaction if you pause more than 7
seconds without hitting a key the system assumes that help is
appropriate at that time. The Keypad will then provide help
for the specific function you are performing. After help is
provided the display returns to the current function. Seven
seconds later the cycle is repeated and the specific help
message is presented two more times. The messages are
always pertinent to the area of the system you are currently
effecting.
Modes
1. The System 7000 system allows you to manage
numerous security appliances with one control. In order
to simplify the choices and make the system quick and
easy to operate, a group of pre-programmed
commands have been organized into modes.
Mode
SLEEP
AWAY
HOME ALONE
ON WATCH
Examples of Special Protection modes include:
OPEN OFFICE
CLOSE OFFICE
69-1192—1
Table 10. Examples of Security Modes.
• All security armed except for bedroom area motion detector.
• Living room motion detector is ON WATCH.
• Special Protection for the home office is turned on.
• All perimeter and security is armed.
• Special Protection for the home office is turned on.
• Interior motion detectors are off.
• Perimeter security is ON WATCH.
• Special Protection for the home office is turned on.
• All perimeter is ON WATCH and will chime when violated.
• Interior protection is off.
• Special Protection for the home office remains as previously set.
• Special Protection for the home office is turned off.
• OPEN OFFICE is momentarily displayed on the keypad.
• The LED next to the UP arrow lights.
• The name of the previously selected Security mode is displayed.
• All other security from previously selected Security modes remains in effect.
• Special Protection for the home office is turned on.
• CLOSE OFFICE is momentarily displayed on the keypad.
• The LED next to the UP arrow goes out.
• The name of the previously selected Security mode is displayed.
• All other security from previously selected Security modes remains in effect.
22
2. A Security mode activates a particular arrangement of
sensors and instructions that tell the security system
what to do which you and the Honeywell representative
selected when the system was installed. A Special
Protection mode changes the protection for special
areas or objects such as the home office, safe,
workshop, liquor cabinet, gun rack etc. Up to eight
security and eight special protection modes are
available. Each can be described by 12 character that
are convenient for the use.
Examples of possible Security modes are listed in Table 10.
Alarm and Trouble Indications on the Keypad
1. Entry/Exit Delay:
Pulsed low tone one second ON, 0.1 second OFF for
the duration of the programmed Entry 1 or 2, or the Exit
delay timer. "EXIT NOW" is displayed on line 1 of the
LCD. Audible Increases in speed for the last 10
seconds. Exit audible is silent for home occupancy
modes.
2. Burglary Alarm:
Continuous loud tone, the point alarm description is
displayed on line 1, the BURGLARY warning message
on line 2. The outside siren is delayed 15 seconds.
Description