Camera Installation; Warnings Before Installation - Cisco 6050 Installation Manual

Camera Installation

This chapter provides information and instructions for installing the Cisco Video Surveillance 6050
IP Camera.
The IP camera requires a network cable and a connection to a standard 10/100BaseT router or switch.
To power the IP camera with Power over Ethernet (PoE), a switch must be 802.3af compliant.
This chapter includes the following topics:
•
•

Warnings Before Installation

•
•
OL-31413-01
Warnings Before Installation, page 2-1
Installing the IP Camera, page 2-2
Power off the IP camera if smoke or
unusual odors are detected.
Contact your Cisco representative if these
situations occur.
Refer to the data sheet for the operating
temperature.
C H A P T E R
• Keep the IP camera away from water. If the
IP camera becomes wet, power it off
immediately.
Contact your Cisco representative if this
situation occurs.
Do not place the IP camera on unsteady
•
surfaces.
Cisco Video Surveillance 6050 IP Camera Installation Guide
2
2-1