Administrator Settings-Emc Resilience Mode - Cisco Telepresence System EX60 User Manual

Cisco Telepresence System EX60
Contents Introduction
Administrator Settings—EMC Resilience Mode
If the Touch controller is used in environments with
considerable amounts of electromagnetic noise present,
you may experience an appearance of false signals—as
if someone tapped the Touch controller when nobody
obviously did so.
To cope with this you may set the EMC resilience
Mode to On. You must then tap and hold for a little while,
rather than just tap, in order to make the system aware
of your tapping. This will avoid the appearance of false
signals.
D14779.05 User guide EX60, TC5.0, November 2011.
All contents are Copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Connecting EX60 Using EX60
42
Scheduled meetings The Settings The Settings
User guide
Contact us
www.cisco.com