Fujitsu fi-6000NS Operator's Manual page 85

•
If the IP address is the same as one already in use, network
HINT
communication problems will occur. In this case, try the following steps:
1. Disconnect the LAN cable and turn the scanner off.
2. Reboot the scanner with the LAN cable still disconnected, and enter
a nonduplicate IP address.
3. Re-connect the LAN cable to the scanner.
•
When DHCP is set to "On", the following settings are assigned by the
DHCP:
•
IP Address
•
Subnet Mask
•
Default Gateway
•
DNS Server
•
WINS Server
•
DNS
Even if DNS or WINS server is set, priority is given to the scanner
settings over the DHCP settings.
•
The connection will be lost if the scanner's IP address is changed via the
Web interface. To continue with other settings, login to the Web interface
again, using the new IP address if connecting via IP address.
3.6 Using the Network Settings Menus
Network Scanner fi-6000NS Operator's Guide
3
59