Length Magnification Setting - Fujitsu fi-6000NS Operator's Manual

■ Length Magnification Setting

If the scanned output is found to be vertically distorted (stretched or squashed) relative to the actual
documents being scanned, the length magnification can be adjusted.
1. On the "Scanner Adjustment" screen, enter the value for the "Length Magnification"
input field.
This changes the length magnification correction value of the vertical scan. Using the
factory default setting as a starting point, the length of the scan can be magnified or reduced
to between -3.1% and 3.1%.
2. Press the [OK] button.
⇒
The length magnification setting is set.
56