Fujitsu fi-6000NS Operator's Manual page 67

•
If the new scanner name is the same as another device name already in
HINT
use on the network, communication problems will occur. In this case, try
the following steps:
1. Disconnect the LAN cable and turn the scanner off.
2. Reboot the scanner with the LAN cable still disconnected, and enter a
3. Reboot the scanner again.
4. Re-connect the LAN cable to the scanner.
•
The connection will be lost if the scanner name is changed via the Web
interface. To continue with other settings, wait a short time for the device to
restart, then login to the Web interface again.
non-duplicate scanner name.
Network Scanner fi-6000NS Operator's Guide
3.5 Using the System Settings Menus
3
41