Fujitsu fi-6000NS Operator's Manual page 274

Problem
Shadow on the
leading edge of the
scanned data.
Vertical line on the
scanned data.
Scanned data appears
skewed or distorted.
Quality of scanned
data is poor.
Cannot login with
administrator
password.
The "Keyboard error
or not keyboard
present" message is
shown on the screen,
the scanner does not
startup.
Input field entry
entered via the
keyboard does not
appear on the screen.
No response from
pressing tab or enter
key after a file
download operation
has been selected via
the web interface.
248
Check item
Are the feed rollers dirty?
Are the glass scanner windows dirty?
Has the document been loaded correctly?
Are the glass scanner windows dirty?
Was the Caps Lock on when the
password was entered?
After turning the scanner off, was the
power turned back on again
immediately?
Has the input field been selected?
Has the [Download], [Get CSV] or
[Backup] button been selected?
Suggestion
Clean the feed rollers.
For more details, refer to "5.2 Cleaning the
ADF" (page 211).
For more details on cleaning the glass
scanner windows, refer to "Chapter 5 Scanner
Care" (page 209).
Load the document correctly.
Clean the glass scanner windows.
Turn off the Caps Lock and try logging in
again.
If the password has been lost or forgotten,
contact your FUJITSU scanner dealer or an
authorized FUJITSU scanner service
provider.
Disconnect the AC cable from the scanner,
wait at least ten seconds, then reattach the
cable and turn the power back on again. If the
problem persists, contact your FUJITSU
scanner dealer or an authorized FUJITSU
scanner service provider.
Try the followings:
•
Select the input field and try again.
•
Press the [Cancel] button and try again.
If a file download operation has been
selected, there may be no response from
pressing the tab or enter key. In this case, try
using the mouse.