Fujitsu fi-6000NS Operator's Manual page 285

Take the following precautions when scanning plastic cards (for
ATTENTION
example ID cards).
•
In Scan Settings, set the Multifeed Setup to [None]. For more details
about Multifeed Setup, refer to "4.7.13 Multifeed Detection (Layer
and Length)" (page 196).
•
Place one card at a time into the ADF paper chute.
•
Cards must be fed through the ADF in portrait mode, as in the
following figure.
•
Cards should be placed face down in the ADF paper chute.
•
Embossed cards should be placed with the raised lettering side
down.
•
Cards should be of the following specifications:
ISO7810-compliant, Type ID-1 cards
Width
Thickness: 0.03 ± 0.003in / 0.76 ± 0.08mm
Material: PVC (polyvinyl chloride) or PVCA (polyvinyl chloride
acetate)
•
Cards that are excessively rigid may not be fed smoothly by the
ADF.
•
Cards that have become dirty from handling should be wiped clean
before scanning.
×
Length: 2.1in X 3.4in / 54mm X 86mm
Network Scanner fi-6000NS Operator's Guide
A
LANDSCAPE
259