System Time - Fujitsu fi-6000NS Operator's Manual

Network settings
The information shown is valid,
but pinging indicates that the
network connection is not
functioning normally.
■ Checking the NTP server settings by synchronizing the

system time

On the "NTP Server" screen, press the [Sync Time] button to check if the system time can be
synchronized.
After pressing the [Sync Time] button, a message dialog such as the following is displayed:
238
Connection
status
NG In "3.6.11 Checking the Network Operating Status"
(page 89), change the [Link Speed/Duplex Mode]
from "Auto-Negotiation" to a fixed mode.
If the problem persists, refer to "Failure to connect
to a remote computer using its IP address" (page
242) for further solutions.
Action