Problems When Connecting To The Scanner Using A Web Browser - Fujitsu fi-6000NS Operator's Manual

6.3.4 Problems when Connecting to the Scanner using a Web Browser

If, when connecting to the scanner via a web browser, the "Scripts are usually safe. Do you want to
allow scripts to run?" message appears, or the "Login" screen appears but the buttons can not be
selected, try the following steps:
No.
1 In Microsoft® Internet Explorer, in the
"Tools" menu, "Internet Options", [Security]
tab, the security level for the corresponding
zone is set as "high", or in [Custom Level],
"Scripting", "Active Scripting" is set to
"Prompt" or "Disable".
246
Problem Action
If the URL includes a scanner name, the
scanner will be connected using an Intranet
Zone. If the URL includes an IP address, the
scanner will be connected using the Internet
Zone.
In Microsoft® Internet Explorer, in the
"Tools" menu, "Internet Options", try the
following settings for the corresponding zone.
•
To enable "Active Scripting", set in one of
the following ways:
•
In the [Security] tab, set the required
"Security level for this zone" to
"Medium".
•
In the [Security] tab, click the [Custom
Level] button. Then, set the
"Scripting", "Active Scripting" to
"Enable".
•
If connecting via the Internet zone, on the
[Privacy] tab, set the level to below
"Medium High".
After the above settings have been performed,
in "Temporary Internet Files", press the
[Delete Cookies] button to delete all
temporary internet files.